jvst
Civil/Environmental
- Jun 6, 2007
- 2
Hi, How stores as a parameter the result of exit (of the archive OUT) referring to the calculation of the gradient (0.3253E-04, 1,000, -99,08), when uses the tool OPTYPE,GRAD of the optimization command? Stretch of an archive OUT goes in annex.
PRINT RESULTS FOR GRADIENT EVALUATION FOR RESPONSE VARIABLE =GU
********** GRADIENT EVALUATION RESULTS **********
REFERENCE DESIGN = SET 1
GRADIENT RESULTS = SETS 2 TO 4
U1 = 0.21000E+06
U2 = 280.00
U3 = 1.5000
***** FOR THE OBJECTIVE FUNCTION GU (REF. VALUE= 138.2 ) *****
CHANGE IN VALUE (DUE TO +1% CHANGE IN DV) GRADIENT
PER DESIGN VARIABLE U1 : 0.6832E-01 0.3253E-04
PER DESIGN VARIABLE U2 : 2.800 1.000
PER DESIGN VARIABLE U3 : -1.486 -99.08
PROVIDE DETAILED OPT SUMMARY PRINTOUT INCLUDING ALL DESIGN SET LISTS
*** EXIT FROM ANSYS DESIGN OPTIMIZATION (/OPT) ***
PRINT RESULTS FOR GRADIENT EVALUATION FOR RESPONSE VARIABLE =GU
********** GRADIENT EVALUATION RESULTS **********
REFERENCE DESIGN = SET 1
GRADIENT RESULTS = SETS 2 TO 4
U1 = 0.21000E+06
U2 = 280.00
U3 = 1.5000
***** FOR THE OBJECTIVE FUNCTION GU (REF. VALUE= 138.2 ) *****
CHANGE IN VALUE (DUE TO +1% CHANGE IN DV) GRADIENT
PER DESIGN VARIABLE U1 : 0.6832E-01 0.3253E-04
PER DESIGN VARIABLE U2 : 2.800 1.000
PER DESIGN VARIABLE U3 : -1.486 -99.08
PROVIDE DETAILED OPT SUMMARY PRINTOUT INCLUDING ALL DESIGN SET LISTS
*** EXIT FROM ANSYS DESIGN OPTIMIZATION (/OPT) ***