Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Grilles vs. Registers
- Thread starter kmtswims
- Start date
STYMIEDPIPER
Mechanical
Definition according to SMACNA (Sheet Metal and Air Conditioning Contractor's National Association)
Grille - A louvered or perforated covering for an air passage opening which can be located in the sidewall, ceiling, or floor.
Register - A grille equipped with an integral damper or control valve
Hope this helps!
Grille - A louvered or perforated covering for an air passage opening which can be located in the sidewall, ceiling, or floor.
Register - A grille equipped with an integral damper or control valve
Hope this helps!
- Status
Similar threads
- Locked
- Question