I am working on a project that serves 45+ residential homes. It has a short forcemain (125+ feet). They have experienced problems with their existing solids handling pumps with rags and clogging. We looked at both the Vaughan Chopper pumps and the Flygt N-impeller. Overall, the references for the Flygt pumps were good, but the Vaughan references loved their pumps. Both pump options we looked at have a capacity of about 175 gpm. The required capacity for the pump station is only 65 gpm but these are the pumps we found to fit the system curve (based on only looking at these two manufacturers) Based on the references we are recommending the chopper pumps. I am trying to come up with more substantial justification for recommending the chopper pumps. Any thoughts?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Grinder vs. solids handling pump application
- Thread starter pmph20
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question