Group installation

[SWscience]

Hello all

what's the best way for installation solidworks on 15 nodes ,if I have standalone license for installation on all of them.
sw20004,winXP,no previous installation exist.
these choise available:
source : CD or Admin image.
Type : standalone(local)
Interface : Silent or dialog box or advertice or silent+dialog box (an installer which sw doesn't guarantee that(swinstaller))

 

[SBaugh]

If you have standalone licenses... then I would hand out the CD's and use them instead of worring about doing an Admin image.

Regards,

Scott Baugh, CSWP

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376

 

[ctopher]

We tried it multiple over the network, but seems to be more effeciant separate.

 

[SBaugh]

If you were wanting to do the admin image, then you should look at getting the SNL set up. Then you can put the Admin setup on the server and have all your users download from there. With Standalone the admin image is only going to let you install SP without the CD's.

Regards,

Scott Baugh, CSWP

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376