Nov 11, 2008 #1 sigma1 Structural Jun 26, 2003 105 0 0 US Is there a min/max thicknes of grout that we can place behind a wall plate supporting a cantiliver beam with relatively small loading? When does bending on the anchors becomes a problem? Thanks
Is there a min/max thicknes of grout that we can place behind a wall plate supporting a cantiliver beam with relatively small loading? When does bending on the anchors becomes a problem? Thanks
Nov 11, 2008 1 #2 Lion06 Structural Nov 17, 2006 4,238 0 0 US any grout bed requires a 0.8 factor on the steel shear strength to account for bolt bending per ACI 318. Upvote 0 Downvote
any grout bed requires a 0.8 factor on the steel shear strength to account for bolt bending per ACI 318.