lclaracq
Mechanical
- Oct 11, 2010
- 6
Hi I'm building a solidworks workstation for large assembly and drawing with lots of view/detail/cut. Right now our main issue are instability, sluggish mate adding/editing and most assembly feature, very sluggish drawing as a whole.
I'm planning for a i5-660 overclocked as much as possible + either a gtx-480 or radeon 5870 or quadro 4000
I do not use realview nor photoview
In term of a hardware spec the quadro is much less powerfull than the GTX-480 and 5870 and it is 400$ more expensive.
So in my context do you think the quadro 4000 will perform 400$ better. (I don't really care about being supported by solidworks or better support from nvidia)
Thanks in advance
I'm planning for a i5-660 overclocked as much as possible + either a gtx-480 or radeon 5870 or quadro 4000
I do not use realview nor photoview
In term of a hardware spec the quadro is much less powerfull than the GTX-480 and 5870 and it is 400$ more expensive.
So in my context do you think the quadro 4000 will perform 400$ better. (I don't really care about being supported by solidworks or better support from nvidia)
Thanks in advance