Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

H2S - 35% MDEA equilibrium constant K = y/x

Status
Not open for further replies.
JohnWeal

JohnWeal

Mechanical
Dec 16, 2012
124
0
0
GB
Good afternoon,

Please can anyone let me know where I can obtain this information so that I can complete my assignment on an absorber tray column.

Column pressure = 1066 kPA
Temperature = 38 deg C

Regards

John
 
Status
Not open for further replies.

Similar threads

BZLAM21
  • Locked
  • Question
kerosene with foam issue
Replies
0
Views
11
BZLAM21
BZLAM21
jmanuel10
  • Locked
  • Question
Calculation / conversion table for H2S %wt to mol/mol in DEA
Replies
2
Views
17
jmanuel10
jmanuel10
PetroDDP
  • Locked
  • Question
Online RSH (Mercaptan) analysis in ATF/Kerosene (Kero Merox feed and run down product stream)
Replies
0
Views
12
PetroDDP
PetroDDP
barbuto
  • Locked
  • Question
Gas-liquid equilibrium rates, Ki
Replies
1
Views
2
25362
25362
PetroDDP
  • Locked
  • Question
Online analyzer for monitoring colour in ATF/Kerosene product stream in Kerosene Merox unit
Replies
2
Views
18
EmmanuelTop
EmmanuelTop
Back
Top