Nov 7, 2006 #1 Rocko1 Industrial Apr 20, 2006 12 with scan to 3d, but how can we use this geometry as points? It will not allow us to select the points to drive curve geometry.
with scan to 3d, but how can we use this geometry as points? It will not allow us to select the points to drive curve geometry.
Nov 7, 2006 #2 ctopher Mechanical Jan 9, 2003 17,449 Do a search here for "point cloud". Chris Systems Analyst, I.S. SolidWorks 06 4.1/PDMWorks 06 AutoCAD 06 ctopher's home (updated 10-27-06) Upvote 0 Downvote
Do a search here for "point cloud". Chris Systems Analyst, I.S. SolidWorks 06 4.1/PDMWorks 06 AutoCAD 06 ctopher's home (updated 10-27-06)
Nov 7, 2006 #3 Theophilus Mechanical Dec 4, 2002 3,407 Have you tried creating a spline in a 3D sketch? You can place spline curve points on the points floating in space to get what you need--at least roughly. It takes time, but ought to work fine. Jeff Mowry http://www.industrialdesignhaus.comReason trumps all. And awe trumps reason. Upvote 0 Downvote
Have you tried creating a spline in a 3D sketch? You can place spline curve points on the points floating in space to get what you need--at least roughly. It takes time, but ought to work fine. Jeff Mowry http://www.industrialdesignhaus.comReason trumps all. And awe trumps reason.
Nov 8, 2006 #4 SBaugh Mechanical Mar 6, 2001 6,685 With the Scan to 3D use the Mesh prep wizard and follow each step it will mesh the point cloud data. Regards, Scott Baugh, CSWP http://www.scottjbaugh.comfaq731-376 Upvote 0 Downvote
With the Scan to 3D use the Mesh prep wizard and follow each step it will mesh the point cloud data. Regards, Scott Baugh, CSWP http://www.scottjbaugh.comfaq731-376
![[pc2]](/data/assets/smilies/pc2.gif "[pc2] [pc2]")