Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hands On Fire Protection Seninars New Jersey

Status
Not open for further replies.

LCREP

Specifier/Regulator
Feb 14, 2004
837
If interested in hands on fire proteciton seminars check out this web site.


The seminars are in New Jersey, about an hour from New York City, at an insurance company Loss Control training facility.

Below is a list of 1 and 2 day seminars most are hands-on, meaning demo fires, pump and water flow testing, wet, dry, pre-action, deluge demos with working equipment.

Module 1 Water Supplies and Sprinkler Systems
Module 2 Dry, Pre-Action, Deluge, Fire Detection
Module 3 Fire Pumps
Module 4A NFPA 25 Inspection Testing of Fire Protection Systems
Module 4B NFPA 25 Inspection Testing of Fire Protection Systems
Module 5 Fire Detection and Alarm Systems
Module 6A Warehouse Fire Protection
Module 6B Warehouse Fire Protection
Module 7A Sprinkler Plan Review
Module 7B Sprinkler Plan Review

The A B means a two day seminar.

Each module will be given 2 times a year, one week in March, May, September, November. Class size is limited to 32.

March 26-30 Mods 1-4B
May 7-11 Mods 5-7B
Sept. 24-28 Mods 1-4B
Nov. 12-16 Mods 5-7B

Each day is 8 hours, 6.5 of classroom time.

Cost for seminars, you can attend one day or 5 days.

1 day $350
2 day $680
3 day $990
4 day $1260
5 day $ 1450
20% discount for the fire service, code officials, and fire/building inspectors.

If you are in NJ and a NJ Fire Official or Fire Inspector, the seminars are approved by the NJ Division of Fire Safety for continuation education credit.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor