Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hardener for resin

Status
Not open for further replies.
jangolobow

jangolobow

Chemical
Jun 26, 2009
29
0
0
DE
Hay! I am searching a powerful hardener for melamine urethan resins. Can you sufggest some of them? I would like to use resin add a crosslinker btw hardener and assure that at higher temperatures they will be good crosslinked.
thanks in advance!
jg
 
Status
Not open for further replies.

Similar threads

Buckshott00
  • Locked
  • Question
Process Setting for Improved Over-molding to prevent delamination In Molded / Extruded Hytrel
Replies
0
Views
20
Buckshott00
Buckshott00
Tymon
  • Locked
  • Question
Most suitable laminating adhesive film for TPU lamination
Replies
0
Views
15
Tymon
Tymon
andradesilva
  • Locked
  • Question
Silicone rubber, material properties for stability (damped vibration)
Replies
1
Views
23
IRstuff
IRstuff
Bay_Area_Mech_Engr
  • Locked
  • Question
Recommended FEA yield criterion for 30% glass-filled LCP ?
Replies
1
Views
19
btrueblood
btrueblood
Mechomatic
  • Locked
  • Question
Material Properties for Vibratory Load
Replies
4
Views
27
Pud
Pud
Back
Top