Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hardener for resin

Status
Not open for further replies.
jangolobow

jangolobow

Chemical
Jun 26, 2009
29
Hay! I am searching a powerful hardener for melamine urethan resins. Can you sufggest some of them? I would like to use resin add a crosslinker btw hardener and assure that at higher temperatures they will be good crosslinked.
thanks in advance!
jg
 
Status
Not open for further replies.

Similar threads

703george
  • Question
Anti Static requirement for a non-metallic bushing
Replies
2
Views
5K
TugboatEng
TugboatEng
1
  • Question
What is the best nylon/polymer filament for a foldable platonic solid with living hinges?
Replies
8
Views
10K
btrueblood
btrueblood
Buckshott00
  • Locked
  • Question
Process Setting for Improved Over-molding to prevent delamination In Molded / Extruded Hytrel
Replies
0
Views
667
Buckshott00
Buckshott00
Tymon
  • Locked
  • Question
Most suitable laminating adhesive film for TPU lamination
Replies
0
Views
235
Tymon
Tymon
andradesilva
  • Locked
  • Question
Silicone rubber, material properties for stability (damped vibration)
Replies
1
Views
213
IRstuff
IRstuff

Part and Inventory Search

Sponsor

Back
Top Bottom