Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hazardous Locations -- Vehicle Maintenance Facility

Status
Not open for further replies.

dragan2u

Electrical
Feb 16, 2011
4
I am a BAS controls engineer, and am having issues finding any code requirements for type of NEMA enclosures needed. The spaces are marked as Class I Div 2, but at certain heights, do those requirements still uphold. Getting 18 NEMA 7 enclosures for Unit Heaters in the spaces will be quite costly and is not is budget. Are there places that I can look for more information regarding height requirements by NFPA/NEC. I have gone through Article 506 and have found nothing. There seems to be a lot of gray area. We will be supplying these enclosures with 120V, and stepdown transformer to 24 volts. Any information will me much appreciated. Thanks.
 
Replies continue below

Recommended for you

You might look at Article 511. It is generally applicable to this type of facility.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor