I have a combustion chamber where 26 thermocouples have been attached to measure the temperature of the inside wall of the chamber. I know the material properties and I was wondering if there was a way to determine the heat flux through the combustion chamber wall as a function of time since the actual combustion activities were controlled. At least is it possible to determine the heat flux at a given point knowing the internal wall temperature and position?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Heat Flux Based Upon Measured Temperatures
- Thread starter mullins
- Start date
