Dec 2, 2002 #1 kman4x4 Aerospace Sep 25, 2002 2 0 0 US I need to heat treat Some A2 tool steel to 52-60 on Rockwell C scale. What is the procedure?
Dec 2, 2002 #2 TVP Materials Apr 12, 2002 4,592 0 0 US Use the recommendations provided by quality companies like Carpenter or Timken Latrobe. You can access this data free-of-charge from the following websites: http://www.cartech.com/ (under Technical Information--you must register, but it is free) http://www.timken.com/products/specialtysteel/engineering/tech_info/html/A2_Select_B.htm Upvote 0 Downvote
Use the recommendations provided by quality companies like Carpenter or Timken Latrobe. You can access this data free-of-charge from the following websites: http://www.cartech.com/ (under Technical Information--you must register, but it is free) http://www.timken.com/products/specialtysteel/engineering/tech_info/html/A2_Select_B.htm