Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HEC-GeoRAS

Status
Not open for further replies.
hydrology1979

hydrology1979

Civil/Environmental
Jul 13, 2007
1
I have been using HEC GeoRAS for floodplain modeling and have found that the final floodplain boundary polygon created by HEC GeoRAS, when imported back to ArcMap, does not quite follow the contours of the TIN. I am using HEC-GeoRAS 4.1, HEC-RAS 3.1.3 and ArcMap 9.1. any suggestions?
 
Status
Not open for further replies.

Similar threads

DrainageEnthusiast
  • Locked
  • Question
HEC-RAS Flow Regime
Replies
4
Views
6K
DrainageEnthusiast
DrainageEnthusiast
B
  • Question
1D Sediment transport modeling HEC-RAS - Constant errors
Replies
0
Views
4K
bobo67
B
ilopran
  • Locked
  • Question
HEC-RAS - 1D Steady - Persistent Warnings
Replies
1
Views
6K
ilopran
ilopran
PT60056
  • Locked
  • Question
Hec-Ras- Cliping a large HEC-RAS model to a small specific area
Replies
3
Views
6K
Ekenny_G
Ekenny_G
PT60056
  • Locked
  • Question
HEC-RAS- I downloaded stream survey
Replies
0
Views
5K
PT60056
PT60056

Part and Inventory Search

Sponsor

Back
Top Bottom