Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HEC-HMS Error 10000 1

Status
Not open for further replies.
GoDucks1

GoDucks1

Civil/Environmental
Jan 13, 2011
1
When attempting to simulate a run I receive the following message in the dialog box, "ERROR: 10000 Unknown exception or error; restart HEC-HMS to continue working. Contact HEC for assistance." I have used the same parameters on a different computer and no problems are encountered. Any ideas? Thanks.
 
Status
Not open for further replies.

Similar threads

B
  • Question
1D Sediment transport modeling HEC-RAS - Constant errors
Replies
0
Views
4K
bobo67
B
DrainageEnthusiast
  • Locked
  • Question
HEC-RAS Flow Regime
Replies
4
Views
6K
DrainageEnthusiast
DrainageEnthusiast
DPBD
  • Locked
  • Question
HEC-RAS Rain-on-Grid approach vs HEC-HMS
Replies
1
Views
752
Ekenny_G
Ekenny_G
ilopran
  • Locked
  • Question
HEC-RAS - 1D Steady - Persistent Warnings
Replies
1
Views
6K
ilopran
ilopran
PT60056
  • Locked
  • Question
Hec-Ras- Cliping a large HEC-RAS model to a small specific area
Replies
3
Views
6K
Ekenny_G
Ekenny_G

Part and Inventory Search

Sponsor

Back
Top Bottom