HEC-RAS Stage and Flow hydrographs

[chayebnihel]

Please,If you can help me, how to activate the stage and flow hydrographs(the message is no data for plot) on the HEC-RAS (for steady and unsteady flow simulation)
regards,

 

[beej67]

edit > unsteady flow data > click your upper boundary > click "flow hydrograph" > enter the data in a table

Hydrology, Drainage Analysis, Flood Studies, and Complex Stormwater Litigation for Atlanta and the South East -

http://www.campbellcivil.com

 

[beej67]

Also, for flow hydrographs, don't enter decimal data, round to the nearest cfs or it blows up. Graph your hydrograph to make sure it looks right to check it.

Hydrology, Drainage Analysis, Flood Studies, and Complex Stormwater Litigation for Atlanta and the South East -

http://www.campbellcivil.com