Heidenhain Parameters

[cncmillerdude]

I have a Deckel/Maho 600W cnc mill with Heidenhain TNC 370 control. The machine was origionally set up as a horizontal but is now set up as a vertical machine to utilise the toolchanger. My problem is that when the machine references the now Y axis (formerley Z axis) moves first. If the machine produces a Gross Positioning Error when a cutter in in a job I have great difficulty removing it as the now Y axis will reference first. Is there a parameter that will change tho order in which the axis will reference?.

Thanks in advance.
Tony Carter.

 

[Steveeng]

Tony,
Ask this question direct to Heidenhain.
Unlike people like Fanuc who charge for every parameter change even though it's in the machine, Heidenhain are very helpful and open.

John S.