Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Helical shaft source 1

Status
Not open for further replies.

Pressed

Mechanical
Aug 24, 2005
315
US
Hi

I am looking for a 4" (100 mm) or longer helical grooved/geared shaft in the OD range from 3/16 - 1" (5 - 25mm).

Will consider any material as I have various applications. I want to pursue buying a stocked item primarily, I know the vendors to ask for specials and don't want that. In my search so far I have seen some short and larger diameter gears and pinions and special made shafts but nothing in the way of standards parts.

The goal is to turn rotary motion into linear motion in the 60-90 deg to 1.25" range or there abouts. Thanks.

_______________________________________
Feeling frisky.........
 
Replies continue below

Recommended for you

Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top