Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help Annealing 409 Stainless Steel

Status
Not open for further replies.

Bullitt96

Mechanical
Joined
Jun 10, 2010
Messages
1
Location
US
I am looking to have expanded metal annealed that is produced from 409 stainless steel. The stainless is annealed then cold worked and now I need it reannealed after is is made into expanded metal. I have been searching but can not find any specifications for a time and temperature. The material is 18" wide, .15" thick and the coil is 500 ' long. I am lookig to have the entire coil annealed and back on the coil. I have been looking for a comapny to strand anneal but have had no luck.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top