Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help HowTo: FactoryTalk 7.0 conversion to 6.1 or 5.1

Thread starter caravoy
Start date Mar 11, 2014

Status: Not open for further replies.

Mar 11, 2014

caravoy

Mechanical

I've got a FactoryTalk HMI program written using 7.0 with a runtime version of 5.1 (because PanelView firmware). Can I convert to 6.1 or 5.1 easily.

My customer tried to restore the file using the runtime, but he got message "You cannot restore the application from the runtime version. It was created in a protected version."

We did not knowingly add any protection.

Any ideas?

Thanks,

Caravoy