GonzaloEE
Electrical
- Jan 31, 2008
- 229
Hi you all, I'm new here. I'm working in a project where I need to convert an analog video signal (PAL or NTSC) to MPEG and JPEG, to either display it in a graphic screen or store files in a SD flash card.
This might sound much like those digital cameras, though there's no need for CCD/CMOS camera input as many video ICs expect.
I'm not a digital video expert, so I'd really appreciate any guidance on custom ICs or design approaches.
The client is reluctant to using CPUs or hiring programmers, so I'm willing to get a fully hardware solution, with minimal need for firmware.
Thanks in advance,
Gonzalo
This might sound much like those digital cameras, though there's no need for CCD/CMOS camera input as many video ICs expect.
I'm not a digital video expert, so I'd really appreciate any guidance on custom ICs or design approaches.
The client is reluctant to using CPUs or hiring programmers, so I'm willing to get a fully hardware solution, with minimal need for firmware.
Thanks in advance,
Gonzalo