HELP to wrap a sticker around a box with NX6

[PSI-CAD]

I need to wrap the sticker around the 4 planar faces and 4 blends of my box.
Have a look at my part
What's the best way with NX6 ?

Thanks in advance


Regards
Didier Psaltopoulos

http://www.psi-cad.com

 

[PSI-CAD]

I found by myself but it's not perfect.
I created a single ruled surface around my box with a little offset.
Then I was able to create a visualization material (instead of decal) with Texture Space Uv
It's nearly good but the sticker is inverted !!!
I tried to change the direction to build my surface and also the normal without any success.
I have attached a zip file with prt and jpeg files
Does anybody have an idea ?
Thanks in advance


Regards
Didier Psaltopoulos

http://www.psi-cad.com

 

[eex23]

replace your picture with following. I just inverted your picture with windows picture mamanager.

 

[PSI-CAD]

Thanks for your answer
In fact, I had planned to do this. But is it a bug or the right way ?


Regards
Didier Psaltopoulos

http://www.psi-cad.com

 

[Toost]

Hi Didier,
I would say it is a known "limitation"...
You should write an Enhancement Request about it.
( And ask for other enhancements on the UV mapping...

You can reverse both curve 1 and curve 2 in the ruled surface, then the image is as expected.

Regards,
Tomas

 

[PSI-CAD]

Hi Tomas,

The result is not good by reversing both curve 1 and curve 2

Did you try ?


Regards
Didier Psaltopoulos

http://www.psi-cad.com

 

[Toost]

I did try,
the result is not good, but the image is reversed...
( see image)

 

[PSI-CAD]

Hi Tomas,

You send me the image from NX menu not from the result !!!


Regards
Didier Psaltopoulos

http://www.psi-cad.com

 

[Toost]

Hello Didier,
Attached is two screenshots of the reversed image.
NX 6053, MP4, Win Xp 32.
the reversed.png is a "studio display mode" screendump
the reversed_HQ_rendered.png is a screendump of a rendered image.

Regards,
Tomas

 

[Toost]

I just learned that i cannot upload two files into the same reply, only the last file will be displayed.
Here is a zipfile with both images.

Regards,
Tomas

 

[PSI-CAD]

Hi Tomas,

Thanks in advance to send me also the part file to understand why I didn't succeed ?



Regards
Didier Psaltopoulos

http://www.psi-cad.com

 

[PSI-CAD]

Hi Tomas,

I have succeeded by reversing curves sense and order.
Thanks


Regards
Didier Psaltopoulos

http://www.psi-cad.com