Help with gradings in Land Development!!!!!!

[Solangel]

Hi, I need to know how to do a grading in a terrain digital model with a 0.50m increment. I want to know if it is possible to put a first level and increase the next parcel 0.50m up from the first one.

 

[nexus3d]

Please be more specific...

What are your intentions (e.g., Are you going to calculated the volume of that one parcel ? Are you trying to get design contours? Are you trying to compare two different volumes? I can probably answer your question if you will be more specific. What's your intensions and do you have any
existing terrain data?

 

[Solangel]

I'm trying to compare two different volumens, so I have to do a new surface with the final site grading that I want, I have an urban project and I have designed the roadways, drainage, stormwater and water distribution systems. Everything made digitally, using Land Development, Civil Survey and Civil Design. I have to make the site grading for the project and there are a lot of lots, with different levels. At present I put the level with 4 points by lot, but in this case there are too many and I want to know if is posible to mark an area and put a level, then mark next area with the level reference from last one marked without create four new points with a new level each time for each lot.

 

[nexus3d]

There are many methods for this process of dealing with this problem.

Brian