Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

help with meshed cross sections in ABAQUS

Status
Not open for further replies.
ahmadw

ahmadw

Structural
Joined
Dec 26, 2013
Messages
7
Location
US
i am using warpd2d4 elements to model a cross section for a beam element BB31OS
i followed the same procedure as told in the following link..

i made an input file and saved it as .bsp.
now, how do i get my mail file to use this section in this .bsp file??

a quick response shall be highly appreciated..
 
Status
Not open for further replies.

Similar threads

A
Abaqus help
Replies
2
Views
8K
ArijitME
A
K
  • Question Question
Trouble Meshing Imported SolidWorks Part in Abaqus – Need Help with Hex or Hex-Dominated Mesh
Replies
2
Views
12K
Simfinite engineering
Simfinite engineering
M
  • Locked
  • Question Question
Assistance with VUHARD Subroutine in Abaqus
Replies
3
Views
3K
FEA way
FEA way
I
  • Question Question
Wear in abaqus
Replies
8
Views
15K
Rama27
R
Ruben Navas
  • Locked
  • Question Question
Help Needed with Hot Pressure Stamping Simulation in Abaqus
Replies
1
Views
634
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top