i have modify my post processor for turbo function, and its workin fine. but 1 problem now my machine time shows 0.0 and
minZ is not shown and also some of unwanted command in nc program. i attach the 2 nc code which is usin the same program. pls help
( WITHOUT TURBO FUNCTION )
%
O1000
(TOOL NAME : FLAT_6)
(TD:6.00 CR:0.00 FL:50.00)
(UG FILE : C:\fanuc.NC)
G17 G40 G49 G80 M94
G28 G91 Z0.0
G28 X0. Y0.
T01 M06
M08
S5000 M03
G00 G90 G54 X0. Y0.
G90 G00 X-.669 Y16.
G43 H01 Z10.
Z-12.
G01 Z-15. F250.
G03 X2.331 Y13. I3. J0.0
G01 X2.356
X10. F500.
G02 X13. Y10. I0.0 J-3.
G01 Y-10.
G02 X10. Y-13. I-3. J0.0
G01 X-10.
G02 X-13. Y-10. I0.0 J3.
G01 Y10.
G02 X-10. Y13. I3. J0.0
G01 X2.381
G03 X5.381 Y16. I0.0 J3.
G00 Z10.
G28 G91 Z0.0
G28 Y0.
M30
(MAXZ = 10. , MINZ = -15.)
(TOTAL MACHINE TIME : 0.4 MINUTES)
%
(WITH TURBO FUNCTION )
%
O1000
(TOOL NAME : FLAT_6)
(TD:6.00 CR:0.00 FL:50.00)
(UG FILE : C:\fanuc_turbo.NC)
G17 G40 G49 G80 M94
G28 G91 Z0.0
G28 X0. Y0.
T01 M06
M08
S5000 M03
G00 G90 G54 X0. Y0.
G90 G00 X-.669 Y16.
G43 H01 Z10.
Z-12. M03 <--- M03 unwantde
G01 Z-15. F250.
G40 G17 <-- G14 G17 unwanted G03 X2.331 Y13. I-3. J0.0
G01 X2.356
X10. F500.
G02 X13. Y10. I0.0 J3.
G01 Y-10.
G02 X10. Y-13. I3. J0.0
G01 X-10.
G02 X-13. Y-10. I0.0 J-3.
G01 Y10.
G02 X-10. Y13. I-3. J0.0
G01 X2.381
G03 X5.381 Y16. I0.0 J-3.
G00 Z10.
G28 G91 Z0.0
G28 Y0.
M30
(MAXZ = 10. , MINZ = 10. <- MINZ not shown )
(TOTAL MACHINE TIME : 0.0 MINUTES <- machine time not shown )
%
minZ is not shown and also some of unwanted command in nc program. i attach the 2 nc code which is usin the same program. pls help
( WITHOUT TURBO FUNCTION )
%
O1000
(TOOL NAME : FLAT_6)
(TD:6.00 CR:0.00 FL:50.00)
(UG FILE : C:\fanuc.NC)
G17 G40 G49 G80 M94
G28 G91 Z0.0
G28 X0. Y0.
T01 M06
M08
S5000 M03
G00 G90 G54 X0. Y0.
G90 G00 X-.669 Y16.
G43 H01 Z10.
Z-12.
G01 Z-15. F250.
G03 X2.331 Y13. I3. J0.0
G01 X2.356
X10. F500.
G02 X13. Y10. I0.0 J-3.
G01 Y-10.
G02 X10. Y-13. I-3. J0.0
G01 X-10.
G02 X-13. Y-10. I0.0 J3.
G01 Y10.
G02 X-10. Y13. I3. J0.0
G01 X2.381
G03 X5.381 Y16. I0.0 J3.
G00 Z10.
G28 G91 Z0.0
G28 Y0.
M30
(MAXZ = 10. , MINZ = -15.)
(TOTAL MACHINE TIME : 0.4 MINUTES)
%
(WITH TURBO FUNCTION )
%
O1000
(TOOL NAME : FLAT_6)
(TD:6.00 CR:0.00 FL:50.00)
(UG FILE : C:\fanuc_turbo.NC)
G17 G40 G49 G80 M94
G28 G91 Z0.0
G28 X0. Y0.
T01 M06
M08
S5000 M03
G00 G90 G54 X0. Y0.
G90 G00 X-.669 Y16.
G43 H01 Z10.
Z-12. M03 <--- M03 unwantde
G01 Z-15. F250.
G40 G17 <-- G14 G17 unwanted G03 X2.331 Y13. I-3. J0.0
G01 X2.356
X10. F500.
G02 X13. Y10. I0.0 J3.
G01 Y-10.
G02 X10. Y-13. I3. J0.0
G01 X-10.
G02 X-13. Y-10. I0.0 J-3.
G01 Y10.
G02 X-10. Y13. I-3. J0.0
G01 X2.381
G03 X5.381 Y16. I0.0 J-3.
G00 Z10.
G28 G91 Z0.0
G28 Y0.
M30
(MAXZ = 10. , MINZ = 10. <- MINZ not shown )
(TOTAL MACHINE TIME : 0.0 MINUTES <- machine time not shown )
%