Help with reuse library integration.

[myersnx]

Does anyone know of any companies that can help in setting up our reuse library. Taking our old parts library and integrating it into the new knowledge fusion based parts we have downloaded and set up from GTAC site.

 

[JohnRBaker]

Have you reviewed the documentation available on the same site from where you can download the existing Machinery Libraries?

The two primary documents I would recommend, as mentioned above, are:

Machinery-library-install-tool-2010-05-07.zip

Standard_Parts_Creation_Best_Practice_v1.1.zip

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[myersnx]

John, We have the library installed and functioning properly however none of the parts reflect our part numbers in the parts list. We have an extensive parts library developed based on part families but we really like the functionality of the reuse library. As an engineering department we do not have the resourced to add the required attribute information into the krx files. That is why we were asking for names of outside companies that could help with this task.

Thanks.