Hi about M10, M11, M78 M79

[holyghost]

Hi frds

I have few question about UGNx6 postprocessor, When I post 4th axis or 5th axis I cant see any M10, M11,M78&M79 those are (Table Unclamp, Table Clamp, Rotary Unclamp, Rotary Clamp). I attached a sample 5th axis part have a look.And help me to comeout with this problem... becoz I am new to postbuilder.

Thanks & Regards
Holy.Ghost


Your file's link is:

http://files.engineering.com/getfil...0f-601f8cf5b46d&file=5th_axis_sample_part.rar

 

[Jaydenn]

Morning,

If you want to output the clamp codes automatically, you need to "turn it on" in NX.

You do this by using a machine control "start event" (OR you can edit the start events in the FIRST operation).

1. Create a new operation > choose "Mill Control"
2. select the "user defined events"
3. add the "clamp" command
4. Settings as follows; Status=active, clamp axis=auto, clamp status=on.

Now when you post, you will see the clamp commands!

Jay.

 

[holyghost]

hi Jay
Thank you very much Jay. Now I can see All codes.

I have another question

That is I always like that all my programs must be in standard like

EG. PROGRAM..

%
T01
M06
T02
M11
M79
G54G90G40G80G00X0Y0B0A0
G43Z100.0H01
M01
M03S1200
M08
-------
-----
------
G00Z100.0M09
M05
G91G28Z0
M30
%

IS IT POSSIABLE TO CUSTOMIZE OUR POSTPROCESSOR AS ABOVE....
IF POSSIABLE CAN YOU GIVE ME AN IDEA WHICH PARAMETER TO BE CHANGED OR ADDEED.

 

[Bugie]

Add the command to the template file

 

[Jaydenn]

holyghost,

You can change just about anything in the post.
You'll need to be a bit more specific about what you want changed.

Perhaps if you include some "before and after" code, I can more easily help you out!

Jay

 

[holyghost]

Hi

Thax Jay and Bugie, I created Postprocessor as I wanted. Everything is fine, But I didnt see "work offsets (work co-ordinate system)" "G54,~G59" in output.

- Let me know where I need to create or asign this ...
or
- I need to select while creating MCS or ..... plz can you tell me where exactly I need to selct.

Thax & Regards
holyghost