Jun 28, 2012 #1 AndyThody Mechanical Nov 2, 2007 8 0 0 GB Hi all, Is there an easy way of creating a (module) gear tooth profile in NX7.5. Thanks for any help. Will help any one out when I get more used to the system. Thanks all.
Hi all, Is there an easy way of creating a (module) gear tooth profile in NX7.5. Thanks for any help. Will help any one out when I get more used to the system. Thanks all.
Jun 28, 2012 #2 MickyV007 Mechanical Jan 14, 2009 622 0 0 CH If you have access to the GTAC website, there are some gear generators to download. Best regards, Michaël. NX7.5.4.4 + TC Unified 8.3 Win 7 64 bit (Intel(R) Xeon(R) CPU X5650 @2.67GHz) 24.0 GB NVIDIA Quadro 4000 + NVIDIA Tesla C2050 Upvote 0 Downvote
If you have access to the GTAC website, there are some gear generators to download. Best regards, Michaël. NX7.5.4.4 + TC Unified 8.3 Win 7 64 bit (Intel(R) Xeon(R) CPU X5650 @2.67GHz) 24.0 GB NVIDIA Quadro 4000 + NVIDIA Tesla C2050
Jun 28, 2012 #3 mmauldin Bioengineer Jul 16, 2004 484 0 16 US Someone uploaded this file a little while back. It's my go-to file for gears. http://files.engineering.com/getfile.aspx?folder=79739124-9b6f-4aa4-bcde-2e71c27090b8&file=gear_generator.prt Upvote 0 Downvote