hi every body i have a problem wit

[mohr123]

hi every body
i have a problem with abaqus,
i model composite laminates using XFEM, but all time get the following error message;
37296 elements have fewer than the required number of integration points. The elements are identified in element set ErrElemMissingIntegPoints.
any one can help me
thank you
best regards
Mohammed

 

[StefCon]

Hi,
The default volume element in Abaqus/CAE 6.12 has the R-ending (example C3D10R) and the R stands for "reduced integration". Change this in your preprocessor or maybe you can just delete the R's in your .inp-file.

Im not sure this will fix it but it might be worth a try.

Best regards,

 

[mohr123]

hi every body
i have a problem with abaqus,
i model composite laminates using XFEM, but all time get the following error message;
37296 elements have fewer than the required number of integration points. The elements are identified in element set ErrElemMissingIntegPoints.
any one can help me
thank you
best regards
Mohammed