NeSsAi
Civil/Environmental
- Jan 31, 2014
- 4
Hi every one,
I am modelling beam to column bolted connection under impact load. Could you suggest the best normal contact type can I use between the bolt head to end plate and between nut to column. Also, just to let you know that I did not model the washers keeping direct contact between bolt head to plate and nut to column.
Regards,
Ali
I am modelling beam to column bolted connection under impact load. Could you suggest the best normal contact type can I use between the bolt head to end plate and between nut to column. Also, just to let you know that I did not model the washers keeping direct contact between bolt head to plate and nut to column.
Regards,
Ali