Hi folks, I get two plc siemns s

[johngladstone]

Hi folks,

I get two plc siemns s7-300 on two production line with two built up profinet output

My question is must I use scalable industrial switch from siemns to connect into 1 pc?
Or using any industrial switch from any company??

Another point
If I get different manufacturing plcs what must I use to connect them?
Which manufacturer of switch I use?

Thank you gentlemen in advance

 

[djs]

Fr communication to a computer, you can use any industrial Ethernet switch.

 

[johngladstone]

Thank you dgs
Best regards

John