Hi. I am searching for the manufac

[pmetelos]

Hi.
I am searching for the manufacturer of a Carbon Epoxy prepreg with T300 and N5208. Does anybody knows?!
Thanks in advance!

 

[BLN]

Try: Cytec Fiberite Inc.:

http://www.cytec.com/

Hexcel Composites:

http://www.hexcelcomposites.com/

Here's a site that lists multiple manufacturers and you may be able to find one in the mix.

http://www.e-composites.com:80/commonFiles/adhesive.asp

 

[pmetelos]

Yes, I can try to contact all the companies but the problem is that I don't even know if it is a standard prepreg. What I am searching for is the prepreg properties including the thickness manufactured, since I need to make an isotropic laminate of 0.5 mm with a minimum of 6 layers. That is why I need to know where this prepreg is available. In the web pages you sent, it is possible that on

http://www.e-composites.com:80/commonFiles/adhesive.asp

there is a company that produces it, but still it will take a lot of time to find out!
Thanks anyway!

 

[BLN]

Evidently it must be available. Try this:

http://composite.about.com/industry/composite/library/data/bldata.htm?terms=T300

Scroll down to Carbon/Epoxy and it gives some of the material properties. I can only assume that it is a common, or often used material.

 

[TQ]

probably a bit late now but I buy lots of T300 T700 etc c/f epoxy prepreg. IT TorayCo fabric with the prepreggers resins system.
What is the N5208? and why that resin system? I think it may be Newport Resins system

 

[pmetelos]

I found somewhere the properties of this prepreg and they were the most suitable for me. This epoxy resin was increasing the stiffness of the ply.
Later, I decided to propose a different material which can be also useful, the Carbon/Cyanate M-40J / 954-6 from Hexcel, so I stopped my search for the other.
Thanks anyway.