High cycle valve

[glowing]

Hello all.
We have a bit of a pet project. We are looking for a high cycle valve. Right now we can only really hink of a cam driven full rotation valve. Ideally, we would like to use a solenoid valve, but will eventually need something at 1000+ RPM, so I don't know how realistinc that is. I know it is not too much deail, but any ideas?

 

[EdDanzer]

You need to provide the fluid type, flow volume, operating pressure, number of ports and flow path. Knowing the opening and closing time required is helpful. If you require a life in number of cycles post that also.

Ed Danzer

http://www.danzcoinc.com

http://www.dehyds.com