Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

High flow electric valve 2

Status
Not open for further replies.

coenzyme

Automotive
Jan 23, 2013
3
0
0
We are trying to find an electric air valve that connects to a small pressurized cylinder that is capable of filling a 1 liter bag in less than 500 microseconds. We have been looking for a couple weeks and have had very little luck. We are trying to exhaust our valve options before we look into inflating the bag with a chemical reaction.
 
Replies continue below

Recommended for you

I think you need to do the math; my crude estimate comes up with about Mach 12 to fill such a bag through a 1-inch diameter opening. Even assuming a 4-inch diameter opening, you need about 2/3 the speed of sound.

You are asking for a process that's 20 times faster than an airbag, which is pretty fast, and uses and explosive to make that happen.

TTFN
faq731-376
7ofakss
 
Status
Not open for further replies.
Back
Top