In all lightning system, the conductor are buried to the ground in a specific depth. The impedance of it is measured using da excitation. This technique is not strictly use when the conductor is diverting a high frequency sources to ground such as lightning current. What method is suitable to measured the impedance due to the lightning.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
High Frequency Impedance Meter
- Thread starter keith2015
- Start date
Similar threads
- Question
- Locked
- Question
- Question
- Question