Daren Samy
Mechanical
- Oct 6, 2022
- 59
We have 4 stage boiler feed water pump and it uses plan 23 for mechanical Seal. After necessary maintenance, pump was taken on recirculation line. I observed the temperature of return water to heat exchanger ( heat exchanger used in plan 23 for mechanical Seal) was higher then adjoining running Boiler Feed Water Pumps same return line. Vibration parameters are normal. My question is
1. Is it normal behaviour ? If so why ?
2. If it is not normal then what can be reason?
Daren!
1. Is it normal behaviour ? If so why ?
2. If it is not normal then what can be reason?
Daren!