Proizvodnja
Mechanical
- Jul 2, 2014
- 44
I'm having a ridiculous high feed rate F20, and I don't know where is coming from since I checked every feed rate option in feeds & speed dialog for turning operations in NX 9.Way there is no option for only one feed rate?
N10 T01 D01
N11 M10 M08
N15 S500 M04
N20 G01 X56.8 Z0.0 F1.
N25 X56. F.16
N30 X-.8 F.107
N35 G00 X-1.6
N40 Z3.
N45 X56.8
N50 G01 Z-.925 F1.
N55 X56. F.16
N60 X34.05 F.178
N65 Z-.865 F20.
N10 T01 D01
N11 M10 M08
N15 S500 M04
N20 G01 X56.8 Z0.0 F1.
N25 X56. F.16
N30 X-.8 F.107
N35 G00 X-1.6
N40 Z3.
N45 X56.8
N50 G01 Z-.925 F1.
N55 X56. F.16
N60 X34.05 F.178
N65 Z-.865 F20.
