Sep 1, 2009 #1 hibaby53 Mechanical Jun 12, 2009 9 0 0 IN Dear folks, I am using NX4.I made a hole in solid part.But I couldn't find that hole in the part navigator, but still hole in the part.How to resolve?
Dear folks, I am using NX4.I made a hole in solid part.But I couldn't find that hole in the part navigator, but still hole in the part.How to resolve?
Sep 2, 2009 1 #2 MickyV007 Mechanical Jan 14, 2009 622 0 0 CH Maybe "Timestamp order" off, right click on Name colum, check Timestamp order. Best regards, Michäël. NX4.04.2 / TCE 9.1.3.8_build_0711 / NX6.0.2.8 Belgium Upvote 0 Downvote
Maybe "Timestamp order" off, right click on Name colum, check Timestamp order. Best regards, Michäël. NX4.04.2 / TCE 9.1.3.8_build_0711 / NX6.0.2.8 Belgium
Sep 2, 2009 1 #3 SiW979 Mechanical Nov 16, 2007 804 0 0 GB To elaborate on Michael's post, expand the part navigator, MB3 (right click) somewhere within the part navigator and check on the pop up menu if Time Stamp Order has a tick next to it. If not, click on it to add a tick. Best regards Simon (NX4.0.4.2 MP10 - TCEng 9.1.3.6.c) http://www.jcb.com Life shouldn't be measured by the number of breaths you take, but by the number of times when it's taken away... Upvote 0 Downvote
To elaborate on Michael's post, expand the part navigator, MB3 (right click) somewhere within the part navigator and check on the pop up menu if Time Stamp Order has a tick next to it. If not, click on it to add a tick. Best regards Simon (NX4.0.4.2 MP10 - TCEng 9.1.3.6.c) http://www.jcb.com Life shouldn't be measured by the number of breaths you take, but by the number of times when it's taken away...
Sep 2, 2009 Thread starter #4 hibaby53 Mechanical Jun 12, 2009 9 0 0 IN Thanks for Your help^^ Upvote 0 Downvote