hole table tags, I've added a hole,how can i get it tagged on drawing?

[borsht]

Since I made the drawing of the part I've added a couple of holes to the pattern. I open the drawing and have updated the hole table. The table adds in the dimentions for the new holes, and references the number for them, but the tags for the new holes dont show up. How do I add them in?

SW2010 sp 2.1, HP Z400 Workstation
Intel xeon w3580@3.33GHz,Win7 pro 64bit
Quardro FX1800

 

[CorBlimeyLimey]

Have you tried either of these (from the Help file)?

To renumber all hole tags:

In the graphics area or the FeatureManager design tree, right-click the hole table and click Renumber All Tags.

To renumber a series of hole tags:

In the hole table, right-click any row in the series and click Renumber Series.

 

[borsht]

I read them and tried them both, but neither added the tags. They were added to the table with the dimesions, but the tags were not added in the graphics area of the drawing.


SW2010 sp 2.1, HP Z400 Workstation
Intel xeon w3580@3.33GHz,Win7 pro 64bit
Quardro FX1800

 

[AnnaWood]

Do a couple ctrl-q rebuilds to force a rebuild of the hole table. You can also RMB the to left corner of the table and select re-number tags. There is a lot of functionality in various areas of the hole table with the RMB. RMB everywhere to see....

Anna Wood
SW2011 SP4, Windows 7 x64

http://www.renderbay.com

http://www.solidmuse.com

http://www.phxswug.com

 

[Fixturedesign]

Boborush is using 2010 - the RMB feature to renumber is new to 2011. Pretty cool feature though ... glad to see SWX working on hole tables as they really need help. Now I really need help upgrading to the latest verison. Still on 2010 myself with some lapses back to 2009!