Horizontal Forces from Vertical Forces

[fabiogardenghi]

I have many Joint Loads > Forces (LOAD1) applied in the direction -z (vertical). However I need create horizontal loads (LOAD2) that is = 0,5xLOAD1 applied in the same joints in the direction y.
How I can do this without create the horizontal forces one by one?

 

[johnbridge231]

You can use a lateral load (Define->Load Patterns) and choose the "User Coefficient" option.

Analysis and Design of arbitrary cross sections
Reinforcement design to all major codes
Moment Curvature analysis

http://www.engissol.com/cross-section-analysis-design.html