Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hot Air Piping Design
- Thread starter RE52
- Start date
RE,
What you have to do is design the piping system in accordance with some code or standard......in the USA it would be ASME B31.1. There is no simple answer to your question.
B31.1 requires the designer to establish a pipe size, select a material type, calculate wall thickness, then determine the best ASTM pipe specification (seamless or seamed) from a group of approved standards.
With 19.5 bar and 450°c, the ice will not be around for a long time....
-MJC
What you have to do is design the piping system in accordance with some code or standard......in the USA it would be ASME B31.1. There is no simple answer to your question.
B31.1 requires the designer to establish a pipe size, select a material type, calculate wall thickness, then determine the best ASTM pipe specification (seamless or seamed) from a group of approved standards.
With 19.5 bar and 450°c, the ice will not be around for a long time....
-MJC
- Status
Similar threads
- Locked
- Question
- Locked
- Question