Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how can I model vibrating magnet and a coil setup .. getting induced voltage and force ?!!

Status
Not open for further replies.
Peterehab

Peterehab

Mechanical
Feb 6, 2017
1
i want to model a permanent vibrating magnet near to a coil ... and get the induced voltage and the force created between the magnet and the coil
can anyone help me with that using abaqus .. i have 6.12
thank u in advance guys
 
Status
Not open for further replies.

Similar threads

Sakthiiitm
  • Locked
  • Question
Regarding section forces and stress in a model
Replies
2
Views
306
Sakthiiitm
Sakthiiitm
A
  • Question
How can I correctly model the damping behavior in ABAQUS for unidirectional composites to achieve realistic oscillations that decay over time?
Replies
6
Views
2K
FEA way
FEA way
D
  • Question
How to model a 2-node beam element
Replies
1
Views
1K
FEA way
FEA way
abc123ali
  • Question
Difference in cohesive zone model results peak force for the same input data
Replies
4
Views
2K
abc123ali
abc123ali
M
  • Question
Impact force
Replies
3
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom