shengyali
Automotive
- May 24, 2020
- 1
Hello everyone：
A question about how to use Abaqus subroutine VUSDFLD to get the stress(element type: C3D8R) and strain at the specific elementID(such as elementID=100) at Specific Increment(or step time),
then replace the element stress(S11,S22,S33,S12.S13,S23) with my date and continue analysis.
I can get the stress and strain use VUSDFLD, but i do not know which elementID the stress belongs to,because the jElem[x] - seems to return the element id on x position in jElem array, not the model element ID. from
Best Wishes
shengya.li
A question about how to use Abaqus subroutine VUSDFLD to get the stress(element type: C3D8R) and strain at the specific elementID(such as elementID=100) at Specific Increment(or step time),
then replace the element stress(S11,S22,S33,S12.S13,S23) with my date and continue analysis.
I can get the stress and strain use VUSDFLD, but i do not know which elementID the stress belongs to,because the jElem[x] - seems to return the element id on x position in jElem array, not the model element ID. from
Best Wishes
shengya.li