Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I repair a broken joist that's ensconced in concrete?

Status
Not open for further replies.

frankzappa

Civil/Environmental
May 19, 2003
1
Hi all:

My wife and I are relocating and we have "an issue" that's scaring off potential buyers.

Under the heaviest part of our small, 75-year-old house, is a cracked joist. The previous owner went notch-happy and now the joist has a major crack running through it that terminates under a notch where 1" pipe runs. West of the split, the joist runs though the bathroom's concrete pan, and with only about 2-3" below the concrete line.

Here's what I did to fix the matter. There was some sag in the beams North and South of the one that's cracked, so I took two lally columns and put a piece of 4x6 pressure-treated wood and jacked up the three joists at both east and west of the crack. So, in other words, I have four lallies with two 4x6's bridging across the same three joists less than four feet apart. I did it really just to be anal, but it's scaring buyers away like crazy.

Here's the question ... since replacing or sistering this beam is impossible due to the concrete pan, is there a less dramatic way of lending support to this broken joist?

Thanks in advance for your advice.

Fred
Port Washington, NY
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor