Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How much cost a 250 BHP boiler 3

Status
Not open for further replies.

Scout915

Electrical
Jul 8, 2004
5
Hi, I need to kmow the approximate price of a firetube boiler, 250 BHP, design pressure 150 psi, work pressure 125 psi, to work with natural gas and F02 like backup

Thanks in advance for your help
 
Replies continue below

Recommended for you

I'm with GenB...at least $65,000.00 + depending on required trim of the boiler, also with a boiler that size freight to the jobsite could be a good amount.
 
I thought that the $65,000 figure given was figurative for standing room only at Yankee stadium.

I needed a ball park price once, and incidentally it was for a fire tubed boiler, and I pressed the inside salesman at a rep firm, and finally he said $64,000.00.

Well, I knew that wasn't even close to what I was looking for, expecting more like the $25,000 range so I asked him where he got that figure.

His answer; "well you wanted a ball park figure, and I don't have any way to know what the right price might be, so I gave you a dollar value based on the seating capacity of Yankee Stadium."

I thought maybe they had added a few seats in this case.

rmw
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor