How to add PMI from part file to master models assembly drawing? NX10/TC10

[IvanNX]

I made a part with PMI. I need to show some of these informations in assembly drawing, Is it possible and if yes how to do it? (design is in master model concept)

_____________________________
Enjoy your work and have fun!

 

[Arkance/PhoeNX]

Yes it is possible, if you use PMI Filters

Anthony Galante
Senior Support Engineer


NX3 to NX11 with almost every MR (24versions)

 

[IvanNX]

I do not have access to GTAC, so if you can explain it.
And just fyi, I can see PMI in drawing model view (using filter to do that), but I can not place selected PMI it on drawing sheet, and that is what I would like to do.

_____________________________
Enjoy your work and have fun!

 

[Arkance/PhoeNX]

see attached video.

Anthony Galante
Senior Support Engineer


NX3 to NX11 with almost every MR (24versions)

 

[IvanNX]

FOUND IT!
Drafting, select view, right click, Settings, PMI tab, enable PMI and set options what to be visible and in what view!

_____________________________
Enjoy your work and have fun!