How to anchor a revision table 2

[tabby1]

Hi,
I have some difficulties to anchor the revision table in the right top corner of a drawing sheet once the drawing views already placed. It always shown in the left bottom corner and I do not know how to move it. It seems that no click or right click on the table is available.

Can you help me. Thanks

 

[4zengineering]

Click where the "plus-sign-with-arrows" is on the revision table to get the property manager to show up. Then, you can select the proper table position in the property manager.

 

[CorBlimeyLimey]

RMB on the drawing (not a view) and enter the Edit Sheet Format mode, then RMB the intersection to be used for the anchor point, select Set as anchor and choose the anchor type.

 

[Gupta65]

Apart from what CBL suggested, you can also right click on the revision table, etc. in the feature manger under sheet format, select anchor and then select a intersection or any other point to set as anchor for that particular type.

Deepak Gupta
SW2009 SP4.1
SW2007 SP5.0
MathCAD 14.0