Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to average plastic strain of a specific region

Status
Not open for further replies.
alireza2013

alireza2013

Mechanical
Aug 1, 2013
2
Hi
I want to average plastic strain in the outer surface of my model for elements which have plastic strain between 0.3 and 1. Is there any way to do this. I'd be grateful if anyone could help me with. Thanks, Ali
 
Status
Not open for further replies.

Similar threads

K
  • Question
How to Directly Output Strain Values for Specific Node/Element Sets Without Writing an ODB File in Abaqus? 1
Replies
3
Views
1K
FEA way
FEA way
M
  • Question
Modeling elasto-plastic behaviour of NiTi
Replies
1
Views
1K
FEA way
FEA way
SKSA
  • Locked
  • Question
Angle of Internal Friction with Plastic Strain
Replies
1
Views
109
FEA way
FEA way
D
  • Question
How to model a 2-node beam element
Replies
1
Views
1K
FEA way
FEA way
Bishal123
  • Locked
  • Question
How to calculate strain rate for VUSDFLD subroutine ABAQUS
Replies
1
Views
187
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom