Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to calculate the coordinate angle of two points in the post processor?

Status
Not open for further replies.
Jay Yu

Jay Yu

Industrial
Oct 4, 2022
3
X2.924 Y-737.155 A0.568236364 <===ATAN(ABS((X5.475-X2.924)/(Y-737.081-Y-737.155))
X5.475 Y-737.081

How to write the formula in the post processor?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Please avoid post duplication - bump up the previous post instead.

"Know the rules well, so you can break them effectively."
-Dalai Lama XIV
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Jian Wang
  • Locked
  • Question
Export points coordinate from NX to txt
Replies
4
Views
1K
Jian Wang
Jian Wang
W
  • Locked
  • Question
how to get graphics window coordinate?
Replies
0
Views
1K
wang.wei
W
CAD2015
  • Question
Get to the part location from the tree................... 4
Replies
5
Views
5K
phoenix_007
P
Jay Yu
  • Locked
  • Question
How to calculate the coordinate angle of two points in the post processor?
Replies
0
Views
75
Jay Yu
Jay Yu
Jay Yu
  • Locked
  • Question
How to calculate the coordinate angle of two points in the post processor?
Replies
0
Views
77
Jay Yu
Jay Yu

Part and Inventory Search

Sponsor

Back
Top Bottom